Air Conditioning and Heating Service

  • We Serve All 5 Boroughs!
  • Residential and Commercial HVAC!
  • Screened and Verified Service Professionals!

855-438-9806

ac condenser repairWant to avoid excessive AC condenser repair work? Start by choosing the right AC system. If you have an AC unit that isn’t the right size or offers enough BTU’s for the space it’s supposed to be cooling, your condenser is probably doing more work than it was designed to do. Choosing an air conditioning unit that has enough BTU’s for your room makes a difference whether you are looking to install a simple window unit or central air conditioning.

What Are BTUs?

Most people get confused when it comes to deciphering BTUs (British Thermal Units) and opt for a unit that looks like it might do the job. The BTUs you choose depend on how much space is being cooled. A 400-450 square foot area, for instance, needs approximately 10,000 BTUs of cooling capacity. Even a central system that is too small won’t properly cool a business or home. Turning up the controls only makes your condenser work harder to attempt to cool a space that it cannot realistically cool, which often translates to AC condenser repair.

Measure Your Room First

To get the right unit for the space you want cooled, you will need to measure the square footage of each room that needs to be cooled. If you are going with one unit for an entire home or business, you will need the total square footage for your home or business. If the space you are measuring isn’t a perfect rectangle or square, divide it into sections and combine the measurements.

Compare Energy Efficiency Ratings

The next step in choosing the right air conditioning unit is finding one that is both cost effective and energy efficient. The Seasonal Energy Efficiency Rating (SEER) indicates how much cool air is produced for each level of energy used by your unit. The higher the rating, the more efficient your system is at cooling the space it is supposed to be cooling. This means that AC condenser repair won’t become a recurring headache.

A final determining factor in cutting down on the need for AC condenser repair is climate. Your AC condenser will work harder if your AC has to run more often to maintain your desired interior temperature. There is nothing you can do about how hot it gets outside. However, a system or unit that is the right size for the space being cooled can save on AC condenser repairs by maximizing your AC’s efficiency.

Professional AC compressor repair can save you from a stuffy building filled with hot air, making your environment unbearable. Family members can’t breathe and workers can’t think. If your air conditioning system is not functioning properly, then air conditioning compressor replacement may be necessary. Trust the experts at Air Conditioning Repair NYC. AC compressor repair is one of our specialties.

Cool, Comfortable Space All Year Round

Residential and commercial air conditioning provides a healthy and comfortable environment for living and working. Many New York apartments and buildings have very poor air flow, which can be worsened by hot, humid summer days. A properly functioning AC compressor creates a pleasant environment in all types of weather all year round.

The summer heat can be especially tough on the young and elderly. Workers also need a cool environment to enable them to focus. When employees are thinking about the heat, they will struggle to concentrate on their jobs.

ac compressor repairCommon AC Compressor Repair Problems

The AC compressor is usually located outside to collect air for cooling. As the name suggests, this apparatus compresses the air to make it easier to cool. It sends this compressed air past the AC refrigerant for cooling. It is essential that the refrigerant be in gaseous format to be effective.

A typical AC compressor should last up to ten years or more. Here are some of the most common problems that require AC compressor repair:

  • No refrigerant or refrigerant is leaking
  • Loose or corroded wires
  • Burnt out capacitor
  • Faulty control board
  • Improper location of the HVAC unit
  • Malfunctioning thermostatic expansion valve
  • Loss of lubricating oil

Your air conditioner is a vital machine in hot weather. It is very complicated with strong chemicals that must be handled by a professional technician. Air Conditioning Repair NYC has the certified experts to return your environment to cool and comfortable. We offer 24/7 service with fast response times. When you need AC compressor repair, don’t settle for second-rate fly-by-night HVAC companies, rely on proven professionals. Call us today!

ac blowing hot airThere are several air conditioning problems that can easily be solved by the homeowner before calling for air conditioning service. An AC blowing hot air is a common complaint that may be caused by a number of issues. Before calling in an HVAC professional, troubleshoot your system with the help of these tips:

Check The Thermostat
It’s common to accidentally turn the thermostat setting to “heat” instead of “cooling.” Make sure your thermostat is set to “cooling” and turn it down 5 degrees. Wait a few minutes to see if changing the setting or lowering the thermostat did the trick.

Check The Outdoor Unit
Make sure the outdoor condensing unit is turned on. If so, check for debris, such as grass clippings, dirt and nearby plant growth, which can become trapped in the fins of your outdoor condensing unit and prevent proper airflow to your system. Hose down the unit to remove the debris.

Check The Air Filter
The air filter in your air conditioner prevents dust from building up inside your system. While the filter is probably not completely responsible for your AC blowing hot air, it can play a major part. When the filter becomes clogged, air doesn’t flow optimally to or from your unit. Turn off the power to your air conditioner and change the filter if it’s dirty.

Check for Ice
Ice buildup on either the indoor or outdoor unit may signal a refrigerant leak. Refrigerant is the chemical responsible for cooling the air in your system. Leaks must be addressed by a qualified HVAC professional due to the dangers of refrigerant to humans and to the environment.

If your air conditioner continues to blow hot air, contact an HVAC technician to inspect and repair your system. As always, planned annual preventive maintenance on your air conditioner can prevent a number of common problems with your system, including your AC blowing hot air, throughout the cooling season. It also increases system efficiency to save you money and extends the operating life of your unit.

Two essential monthly tasks that homeowners can perform to prevent problems like the AC blowing hot air are changing the air conditioner filter when it’s dirty and hosing down the outdoor unit to remove debris trapped in the fins.

If you’re handy with mechanical projects, have a solid understanding of plumbing, electrical and ductwork and have a good selection of tools at your disposal, DYI air conditioning installation may be a project you can do yourself. While you can save hundreds of dollars by opting to do it yourself, you should be aware of the down sides of a DIY job of this caliber:

  • Incorrect installation can considerably reduce the efficiency and safety of your system.
  • There will be no labor warranty to fall back on in the event your system fails, and the product warranty may be void if you install it yourself.
  • You may encounter problems during installation that you’re not comfortable trying to solve, or for which you don’t have the proper tools .

dyi air conditioning installationAir conditioning installation is fairly straightforward for the handy homeowner, and with the help of instructional materials, you should be able to perform up to 90 percent of the installation yourself. The remaining ten percent of the install, which involves charging the system with refrigerant, must be done by a qualified HVAC professional due to Federal regulations regarding handling this potentially dangerous chemical.

Before beginning your air conditioning installation, read through the instructions thoroughly and make sure you understand every step of the process. Gather the required tools and make sure you have a clear plan of action before you proceed. These tips will help you prepare for and perform your air conditioning installation:

Outdoor condensing unit

  • Install the outdoor condensing unit in a shaded area to lower your cooling costs.
  • Consider the noise the condensing unit makes and locate it where it won’t disturb your neighbors at night.
  • Maintain at least two feet of unobstructed space around the unit.

Ductwork and registers

  • If you’re installing new ductwork, keep as much of it as possible in conditioned spaces rather than in attics and crawl spaces. Insulate ducts that must be placed in unconditioned areas.
  • Use the Air Conditioning Contractors of America (ACCA) Manual D to properly size your ducts.
  • Use mastic duct sealant to seal your ducts.
  • Make sure you have adequate return and supply registers for optimum air flow.

Indoor components

  • Allow plenty of room for the indoor unit to ensure easy accessibility for service and maintenance.
  • Locate your thermostat in a central location on an interior wall, away from any heat sources.

During your install, don’t be afraid to contact a qualified HVAC professional if you need help. Having your unit inspected when you’re finished is always a good idea to ensure your system is properly installed.

 Page 3 of 14 « 1  2  3  4  5 » ...  Last »